|
【标准号】 |
【标 准 标 题 】 |
| ISO/TR 7066-1:1997 |
Assessment of uncertainty
in calibration and use of flow measurement devices
-- Part 1: Linear calibration relationships |
| ISO 7066-2:1988 |
Assessment of uncertainty
in the calibration and use of flow measurement devices
-- Part 2: Non-linear calibration relationships |
| ISO 2186:1973 |
Fluid flow in closed
conduits -- Connections for pressure signal transmissions
between primary and secondary elements
|
| ISO 2975-1:1974 |
Measurement of water
flow in closed conduits -- Tracer methods -- Part
1: General |
| ISO 2975-2:1975 |
Measurement of water
flow in closed conduits -- Tracer methods -- Part
2: Constant rate injection method using non-radioactive
tracers |
| ISO 2975-3:1976 |
Measurement of water
flow in closed conduits -- Tracer methods -- Part
3: Constant rate injection method using radioactive
tracers |
| ISO 2975-6:1977 |
Measurement of water
flow in closed conduits -- Tracer methods -- Part
6: Transit time method using non-radioactive tracers |
| ISO 2975-7:1977 |
Measurement of water
flow in closed conduits -- Tracer methods -- Part
7: Transit time method using radioactive tracers |
| ISO/TR 3313:1998 |
Measurement of fluid
flow in closed conduits -- Guidelines on the effects
of flow pulsations on flow-measurement instruments
(available in English only) |
| ISO 3354:1988 |
Measurement of clean
water flow in closed conduits -- Velocity-area method
using current-meters in full conduits and under
regular flow conditions |
| ISO 3966:1977 |
Measurement of fluid
flow in closed conduits -- Velocity area method
using Pitot static tubes |
| ISO 4006:1991 |
Measurement of fluid
flow in closed conduits -- Vocabulary and symbols |
| ISO 4053-1:1977 |
Measurement of gas
flow in conduits -- Tracer methods -- Part 1: General |
| ISO 4053-4:1978 |
Measurement of gas
flow in conduits -- Tracer methods -- Part 4: Transit
time method using radioactive tracers |
| ISO 4064-2:2001 |
Measurement of liquid
flow in closed conduits -- Weighing method |
| ISO 4064-3:1999 |
Measurement of water
flow in closed conduits -- Meters for cold potable
water -- Part 3: Test methods and equipment |
| ISO 4185:1980 |
Measurement of liquid
flow in closed conduits -- Weighing method |
| ISO 5167-1:1991 |
Measurement of fluid
flow by means of pressure differential devices --
Part 1: Orifice plates, nozzles and Venturi tubes
inserted in circular cross-section conduits running
full |
| ISO/TR 5168:1998 |
Measurement of fluid
flow -- Evaluation of uncertainties |
| ISO 6817:1992 |
Measurement of conductive
liquid flow in closed conduits -- Method using electromagnetic
flowmeters |
| ISO 7066-2:1988 |
Assessment of uncertainty
in the calibration and use of flow measurement devices
-- Part 2: Non-linear calibration relationships |
| ISO 7145:1982 |
Determination of
flowrate of fluids in closed conduits of circular
cross-section -- Method of velocity measurement
at one point of the cross-section |
| ISO 7194:1983 |
Measurement of fluid
flow in closed conduits -- Velocity-area methods
of flow measurement in swirling or asymmetric flow
conditions in circular ducts by means of current-meters
or Pitot static tubes |
| ISO 7858-1:1998 |
Measurement of water
flow in closed conduits -- Combination meters for
cold potable water -- Part 1: Specifications |
| ISO 7858-2:2000 |
Measurement of water
flow in closed conduits -- Combination meters for
cold potable water -- Part 2: Installation requirements |
| ISO 8316:1987 |
Measurement of liquid
flow in closed conduits -- Method by collection
of the liquid in a volumetric tank |
| ISO 9104:1991 |
Measurement of fluid
flow in closed conduits -- Methods of evaluating
the performance of electromagnetic flow-meters for
liquids |
| ISO 9300:1990 |
Measurement of gas
flow by means of critical flow Venturi nozzles |
| ISO 9368-1:1990 |
Measurement of liquid flow
in closed conduits by the weighing method -- Procedures
for checking installations -- Part 1: Static weighing
systems |
| ISO/TR 9464:1998 |
Guidelines for the use of ISO
5167-1:1991 (available in English only) |
| ISO 9951:1993 |
Measurement of gas
flow in closed conduits -- Turbine meters |
| ISO 10385-1:2000 |
Measurement of water
flow in closed conduits -- Meters for hot water |
| ISO 10790:1999 |
Measurement of fluid
flow in closed conduits -- Guidance to the selection,
installation and use of Coriolis meters (mass flow,
density and volume flow measurements) (available
in English only) |
| ISO 11631:1998 |
Measurement of fluid
flow -- Methods of specifying flowmeter performance
(available in English only) |
| ISO/TR 12764:1997 |
Measurement of fluid
flow in closed conduits -- Flowrate measurement
by means of vortex shedding flowmeters inserted
in circular cross-section conduits running full
(available in English only) |
| ISO/TR 12765:1998 |
Measurement of fluid
flow in closed conduits -- Methods using transit-time
ultrasonic flowmeters (available in English only) |
| ISO/TR 12767:1998 |
Measurement of fluid
flow by means of pressure-differential devices --
Guidelines to the effect of departure from the specifications
and operating conditions given in ISO 5167-1 (available
in English only) |
| ISO 13359:1998 |
Measurement of conductive
liquid flow in closed conduits -- Flanged electromagnetic
flowmeters -- Overall length |
| ISO 14164:1999 |
Stationary source
emissions -- Determination of the volume flowrate
of gas streams in ducts -- Automated method |
| ISO/TR 15377:1998 |
Measurement of fluid
flow by means of pressure-differential devices --
Guidelines for the specification of nozzles and
orifice plates beyond the scope of ISO 5167-1 (available
in English only) |
| ISO 748:1997 |
Measurement of liquid
flow in open channels -- Velocity-area methods (available
in English only) |
| ISO 772:1996 |
Hydrometric determinations
-- Vocabulary and symbols |
| ISO 1070:1992 |
Liquid flow measurement
in open channels -- Slope-area method |
| ISO 1088:1985 |
Liquid flow measurement
in open channels -- Velocity-area methods -- Collection
and processing of data for determination of errors
in measurement |
| ISO 1100-1:1996 |
Measurement of liquid
flow in open channels -- Part 1: Establishment and
operation of a gauging station (available in English
only) |
| ISO 1100-2:1998 |
Measurement of liquid
flow in open channels -- Part 2: Determination of
the stage-discharge relation (available in English
only) |
| ISO 1438-1:1980 |
Water flow measurement
in open channels using weirs and Venturi flumes
|
| ISO 2425:1999 |
Measurement of liquid
flow in open channels under tidal conditions (available
in English only) |
| ISO 2537:1988 |
Liquid flow measurement
in open channels -- Rotating element current-meters |
| ISO 3454:1983 |
Liquid flow measurement
in open channels -- Direct depth sounding and suspension
equipment |
| ISO 3455:1976 |
Liquid flow measurement
in open channels -- Calibration of rotating-element
current-meters in straight open tanks |
| ISO 3716:1977 |
Liquid flow measurement
in open channels -- Functional requirements and
characteristics of suspended sediment load samplers |
| ISO 3846:1989 |
Liquid flow measurement
in open channels by weirs and flumes -- Rectangular
broad-crested weirs |
| ISO 3847:1977 |
Liquid flow measurement
in open channels by weirs and flumes -- End-depth
method for estimation of flow in rectangular channels
with a free overfall |
| ISO 4359:1983 |
Liquid flow measurement
in open channels -- Rectangular, trapezoidal and
U-shaped flumes |
| ISO 4360:1984 |
Liquid flow measurement
in open channels by weirs and flumes -- Triangular
profile weirs |
| ISO 4362:1999 |
Hydrometric determinations
-- Flow measurement in open channels using structures
-- Trapezoidal broad-crested weirs (available in
English only) |
| ISO 4363:1993 |
Measurement of liquid
flow in open channels -- Methods for measurement
of suspended sediment |
| ISO 4364:1997 |
Measurement of liquid
flow in open channels -- Bed material sampling (available
in English only) |
