|
论文题目
|
作者
|
|
LEGAL METROLOGY, STANDARDS AND CUSTODY
TRANSFER MEASUREMENT
|
|
Practical experience in
industrial wastewater flow measurement
|
B.S. BERGSTRAND
|
|
International harmonization
in the field of dynamic measurement of
liquid quantities
|
H. BLUSCHKE |
|
Transfer standards in
cryogenic flow measurement
|
J.A. BRENNAN
|
| C.H. KNEEBONE |
| E. JENKINS |
|
Legal aspects and traceability
of high pressure gas measurements in the
Netherlands
|
C.P. HOEKS |
| Accuracy of custody transfer
measurement |
P.A.M. JELFFS |
| System aspects of oil metering
stations for custody transfer with special
regard to their reliability |
S. KUN |
| Liquid quantity meters in
combination with density meters, a realistic
alternative to weigh-bridges in loading
stations for liquids |
F.A.L. VAN LAAK |
| High accuracy gauged M.I.
flow integrator |
R. VAN DER POL |
| Application of electronic
equipment in flow measurement and its legal
aspects |
T.D. ROODBERGEN |
| Coefficients of orifice plates |
J. STOLZ |
|
CALIBRATION,
CALIBRATION FACILITIES AND INTERCOMPARISON
OF STANDARD LABORATORIES
|
| The IMGC installation
for water flow measurement; metrological
characteristics |
F. ALASIA |
| G. CIGNOLO |
| R. GORIA |
| A. RIVETTI |
| About the accuracy of flow
meter calibrating devices |
Zc. BERCSI |
| Practical experience in industrial
wastewater flow measurement |
B.S. BERGSTRAND |
| Transfer standards
in cryogenic flow measurement |
J.A. BRENNAN |
| C.H. KNEEBONE |
| E. JENKINS |
| Calibration of electromagnetic
flowmeters using a flow simulator |
A.C.HAACKE |
| The cost-effectiveness of
liquid flowmeter calibration systems |
A.T.J. HAYWARD |
| Accuracy of liquid
calibration systems based on the weighing
method |
D. HOOGENDOORN |
| J. TEIJEMA |
| Accuracy of custody transfer
measurement |
P.A.M. JELFFS |
| A study of inter-laboratory
comparisons of calibrations on ten orifice
plates |
S.A. LEVIE |
| C.A.E. CLAY |
| R.W. MILLER |
| E.A. SPENCER |
| L. UPP |
| Steps toward an
ideal transfer standard of flow measurement |
G.E. MATTINGLY |
| W.C. PURSLEY |
| R. PATON |
| E.A. SPENCER |
| Facility for calibration ,
under operating conditions, of gas flow
metering equipment |
H. BELLINGA |
| Primary calibrations
of critical flow venturi nozzles in high-pressure
gas |
T.J.S. BRAIN
|
| J. BEID |
| Rotannular-weight provers
in practice of proving gas metering devices |
V.S. CHEREPANOV |
| The techniques of calibrating
low flow rates with particular reference
to variable area meters |
E.A. HODGE |
| Legal aspects
and traceability of high pressure gas measurements
in the Netherlands |
C.P. HOEKS |
| An industrial flowmeter calibration
facility |
K.J. MARSDEN |
| The application of interferometry
to the precision measurement of volumetric
or mass flows with sonic venturi nozzles |
L. NARJES |
| EEC-Intercomparison
campaign on high-pressure gas flow test
facilities |
L.NARJES, and |
| E.A. SPENCER |
| E. EUJEN |
| Tracer calibration
of differential flowmeters used to measure
large gas flowrates |
D. RAMELOT |
| C. STOLZ |
| J. LUCKERS |
| On the inaccuracy of a massflow
meter for supercritical ethylene |
H. VAN ROOY |
| On the discharge
coefficient of critical venturis |
N. WATANABE |
| K. KOMIYA |
