|
论文题目
|
作者
|
|
PRESSURE DIFFERENTIAL AND REATED DEVICES
|
| Errors in differential
pressure flowmeters due to pressure fluctuations |
R. CAEN |
| J. PIQUEMAL |
| Tracer calibration
of differential flowmeters used to measure
large gas flowrates |
D. RAMELOT |
| C. STOLZ |
| J. LUCKERS |
| Deformation of orifice plates;
theory and practice |
J. GORTER |
| The effect of bends on the
discharge coefficient of orifice plates |
S.J. IRVING |
| A study of inter-laboratory
comparisons of calibrations on ten orifice
plates |
S.A. LEVIE |
| C.A.E. CLAY |
| R.W. MILLER |
| E.A. SPENCER |
| L.UPP |
| Coefficients of orifice plates |
J. STOLZ |
| Practical applications
of orifice plate meters and turbine meters
in a gas flow under high pressure |
A.J.J. TIMMERMANS |
| G.J. HOUBEN |
| Primary calibrations
of critical flow venturi nozzles in high-pressure
gas |
T.J.S. BRAIN |
| J. BEID |
| The application of interferometry
to the precision measurement of volumetric
or mass flows with sonic venturi nozzles |
L. NARJES |
| EEC-Intercomparison
campaign on high-pressure gas flow test
facilities |
L. NARJES |
| E.A. SPENCER |
| E. EUJEN |
| On the discharge
coefficient of critical venturis |
N. VATANABE and |
| K. KOMIYA |
| Comparison of
the effect of a distorted profile on electromagnetic,
ultrasonic and differential pressure flowmeter |
Y.A. AL-KHAZRAJI |
| R.H. AL-RABEH |
| R.C. BAKER |
| J. HEMP |
| The design and
evaluation of a pulsating flow facility
together with some results obtained from
tests on a drag plate flow meter |
W.L. GREEN |
| J.J. HUNTER |
| Compariative study
of quadrant-edged orifices and nozzles |
S.H. ALVI |
| K. SRIDHARAN |
| N.S. LAKSHMANA RAO |
| The estimation
of the error at the flow rate measurement
by Pitot-static tube |
T. LAJOS |
| L. PRESZLER |
| M. BLAHO |
| Coefficients for
segmental orifices |
J.F. RUFF |
| F. LUX III |
| Research work on flow measurement
by the Winter-Kennedy method |
F. SCHWEIGER |
| Flow measurement
in a pulsating flow by a new automatically
controlled static-plate flowmeter |
F.E. WAGNER |
| A. MIRAHMADI |
| Calibration of
a linear pad resistor |
N. WIENERS |
| F. PETERS |
| W. MERZKIRCH |
|
ELECTROMAGNETIC
FLOWMETERS
|
| Comaarison of
the effect of a distorted profile on electromagnetic,
ultrasonic and differential pressure flowmeters |
Y.A. AL-KHAZRAJI |
| R.H. AL-RABEH |
| R.C. BAKER |
| J. HEMP |
| Probe type electromagnetic
flowmete |
V. CUSHING |
| Calibration of electromagnetic
flowmeters using a flow simulator |
A.C. HAACKE |
| Magnetic flowmeter with capacitive
signal pick-off |
M. HOFMANN |
| New developments
in magnetic flow measurement using keyed
D.C.-field |
F. HOFMANN |
| Comparison of some 500 mm
diameter electromagnetic flowmeters |
J. DE JONG |
| Enhanced magneter performance
with pulsed d.c. excitation |
W. KIENE |
| Flow rate measurement of conductive
liquids by means of electromagnetic velocimeters |
B.I. NIKITIN |
| High accuracy gauged M.I.
flow integrator |
R. VAN DER POL |
| Velocity profile influence
on electromagnetic flowmeter accuracy |
I.REINHOLD |
| Some properties of magnetic
circuits in electromagnetic flowmeters for
special use |
J. SEN |
| On measuring discharge in
partly-filled pipes |
K.H. STRAUSS |
| Recent developments in LMFBR
coolant flow measurement techniques |
G. THATCHER |
